Shear Beam Load Cells
Single Ended Shear Beam Load Cell Model MTI-2513-SB
STANDARD CAPACITIES: 5k, 10k, 20k, 30k, 40k, 50k, 60k
(Special capacities available)
FEATURES / SIZE, CAPACITY & PRICE SPECIFICATIONS / TECHNICAL SPECIFICATIONS
The Model 2513 double end beam load cell is the answer for harsh, washdown/corrosive environments. It’s true nitrogen filled hermetic seal makes it a survivor. A welded NPT fitting for water tight cable is included. The Model 2513’s unique design withstands shock loads that ordinarily damage other load cells.
MTI’s calibration is traceable to The National Institute of Standards Technology (NIST). Each sensor is thoroughly tested and is calibrated to meet or exceed NIST standards of performance.
* Gage-Seal IITM is a proprietary sealant. It’s unique properties offer strain gauges long term protection from the penetration of hydroscopic moisture during changes in barometric pressure.
FEATURES
- Nitrogen Filled
- Hermetically Sealed
- Stainless Steel Encased
- Intrinsically Safe
- 300% Safe Load
- 200% Side load Discrimination
- Welded conduit adaptor
- Three Year Warranty
- High Accuracy
- FM Approved for hazardous environments, Class I, II, III, Div. l, Groups A, B, C, D, E, F, & G per drawing 50010
SIZE, CAPACITY & PRICE SPECIFICATIONS
Dimensions are inches, unless otherwise noted.
| Capacity in Pounds |
5- 2,000 | 30,000-60,000 |
| A | 1.14 | 2.38 |
| B | 1.44 | 1.88 |
| C | 6.88 | 8.50 |
| E | .68 | 1.06 |
| R1 | 0.50 | 1.00 |
| R2 | 1.48 | 2.73 |
| L | 8.12 | 10.25 |
| Price | $770.00 | $835.00 |
TECHNICAL SPECIFICATIONS
SPECIFICATIONS: 2513 Shearbeam Load Cell |
|
| Capacities | 5K, 10K, 20K, 30K, 40K, 50K, 60K |
| Side Load | 100 % Full Scale |
| Safe Load | 300 % Full Scale |
| Full Scale Output | 3.0 mV/V |
| Excitation | 4 - 18 VDC |
| Non Linearity | 0.03% Full Scale |
| Hysteresis | 0.02% Full Scale |
| Comp. Temp. Range | 0 to 150º F |
| Insulation Resistance | 5000 megohms |
| Bridge Resistance | 700 ohms, nominal |
| Seal Type | Hermetically sealed, IP66/68 |
| Material / Finish | Stainless Steel |
| Cable Length | 25 Ft. |
For more information about this
Single Ended Shear Beam Load Cell, Model MTI-2513-SB,
please phone 1-888-684-9344,
or email us at: staff@mti-weigh.com,
or fill out our quote form.
