Tank Weighing Assemblies
MTI Model 4559-WA
APPLICATIONS: Tank, Bin, and Hopper weighing, Precision Batching, Blending and mixing operations, Level indication.
FEATURES / DIMENSIONS / TECHNICAL SPECIFICATIONS / LOAD CELL WIRING
The Model 4559 is the choice for light capacity tank weighing applications. 
This assembly with its neoprene isolation mount is also well suited to applications with vibration.
MTI’s calibration is traceable to The National Institute of Standards Technology (NIST). Each sensor is thoroughly tested and is calibrated to meet or exceed NIST standards of performance.
Features
Standard Capacities:
0, 75, 100, 150, 250, 500, 1K, 1.5K, 2.5K
- Capacities range from 50 to 2500 lbs.
- Neoprene isolation mount minimizes the negative effects of vibration and shock loads.
- Optional stainless steel, hermetically sealed construction for washdown or outdoor applications.
- Low profile design.
- Standardized outputs from the load cells makes calibration and maintainance effortless for multi-cell applications.
- Optional Factory Mutual System Approved for hazardous environments.
- NTEP Certification available for Legal for Trade applications.
- Two Year Warranty.
Note: discounted prices are available for quantity purchases.
DIMENSIONS
TECHNICAL SPECIFICATIONS
Technical Specifications: 2616 Tank Weighing Assembly |
|
| Capacities | 50, 75, 100, 150, 250, 500, 1K, 1.5K, 2.5K |
| Safe Load | 150% of Rated Capacity |
| Side Load Protection | 150% of Full Scale |
| Full Scale Output | 3.0 mV/V Typ. ±.25% |
| Excitation | 10 VDC (15V Max) |
| Non Linearity | < 0.03% Full Scale Output |
| Hysteresis | < 0.02% Full Scale Output |
| Comp. Temp. Range | 0 to 150°F |
| Non-Repeatability | < 0.01% Full Scale Output |
| Zero Balance | ± 1% Full Scale Output |
| Temp. Effect Output | < 0.008%/ºF |
| Temp. Effect Zero | < 0.0015%/ºF |
| Bridge Resistance | 350 Ohms (nominal) |
| Cable Length | 25 feet |
| System Accuracy | Better than 0.1% |
| Material and Finish: Load Cell | Electroless Nickle plated tool steel; Stainless Steel |
| Material and Finish: Mounting Assembly | Zinc Plated Steel with Neoprene Shock Mount Stainless Steel with Neoprene Shock Mount |
LOAD CELL WIRING
