Digital Load Cells
Digital Canister Load Cell Model MTI-RTCSP-D
APPLICATIONS: road weighbridges, rail weighbridges, high capacity process weighing.
FEATURES / SIZE, CAPACITY & PRICE SPECIFICATIONS / TECHNICAL SPECIFICATIONS
The Digital Canister Compression Load Cell is a multi-column, low profile, stainless steel, compression load cell with a digital out put signal.
This digital output enables the user to communicate with each Digital Canister load cell independently of the others in the system, thus offering advantages in load cell and weigh system setup, weigh system control, corner correction, fault finding and load cell replacement.
FEATURES
- Digital output via RS485 or RS422 interface
- Low profile, multi-column, fully stainless steel construction
- Hermetically Sealed, IP66/68
- Certified to OIML R-60, 4000d
- Internal diagnostics
- Internal lightning protection
- 240,000 counts resolution
- Maximum transmission distance: 1200 meters
- Capacities: 10 - 100 ton
SIZE, CAPACITY & PRICE SPECIFICATIONS
Dimensions are mm, unless otherwise noted.
| Capacity in Tons |
5, 10, 25 | 40 | 60 | 100 |
| A | 73.0 | 105.0 | 152.4 | |
| B | 31.8 | 58.7 | 79.2 | |
| C | 152.0 | 152.0 | 423.0 | |
| D | 6.5 | 8.0 | 23.6 | |
| E | 82.5 | 127.0 | 184.2 | |
| F | 7.0 | 29.0 | 67.5 | |
| G | 58.0 | 82.5 | 123.8 | |
| H | M12 x 1.75 11 Deep |
M20 x 2.5 20 Deep |
||
| I | 1.5 | 11.0 | 21.8 | |
| J | 78.6 | 98.2 | 124.0 | |
| K | 50.0 | |||
| L | 25.0 | |||
| M | ½" NTP | |||
| Accuracy Class |
D3 | D3 | D3 | D3 |
| List Price | $1,555.00 | $1,650.00 | $1,735.00 | $2,215.00 |
TECHNICAL SPECIFICATIONS
SPECIFICATIONS: SCC Digital Load Cell |
|||||
| Standard Capacities (=Emax) | t | 10, 25, 40, 60, 100 | |||
| OIML R-60 Accuracy Class | CC | C2 | C3 | C4 | |
| Max. num Verification Intervals(nlc) | 2000 | 3000 | 4000 | ||
| Min. Verification Intervals(Vmin) | Emax/10000 |
||||
| Min. Utilisation | % | 20 | 30 | 40 | |
| Min. Verification Interval Type MR | Emax/20000 | ||||
| Min. Utilization Type MR | % | 15 | 20 | ||
| Combined Error | %S | <+0.0500 | <+0.0230 | <+0.0200 | <+0.0173 |
| Non- Repeatability | %S | <+0.0200 | <+0.0100 | <+0.0100 | <+0.0090 |
| Creep Error (30 minutes) | %S | <+0.0600 | <+0.0245 | <+0.0245 | <+0.0184 |
| Min. Dead Load | %Emax | 0 |
|||
| Max. Safe Overload | %Emax | 150 |
|||
| Max. Safe Side Load | %Emax | 10 | |||
| Excitation Voltage | Vdc | 11.6...17.0 |
|||
| Rated Output | counts | 240,000 | |||
| Rated Output Tolerance | counts | <+ 200 |
|||
| Zero Balance | counts | <+ 200 | |||
| Insulation Resistance | ohms | >+ 5000 |
|||
| Sealing | (DIN40.050 / EN60.529 / IEC
529) |
||||
| Signal update per sec. | 25 |
||||
| Baud Rate | bit/s | 9600 |
|||
| Parity | Even |
||||
| Max. Transmission Cable length | m | 1200 |
|||
| Data Transmission Interface | RS485 / RS 422 - Full Duplex |
||||
| Compensated Temp Range | °C | -10 to +40 |
|||
For more information about this Digital Canister Load Cell, Model MTI-RTCSP-D,
please phone 1-888-684-9344,
or email us at: staff@mti-weigh.com,
or fill out our quote form.
