| Filling System Data Sheet |
| PRODUCT DETAILS |
Project or Job Number:
|
|
|
| DRUMS, TOTES, CONTAINER, ETC. |
|
|
| CLOSURES |
|
|
| Pallets |
|
|
| PRODUCT FEED TO THE FILLING SYSTEM |
Product flow rate
(gallons/min. or liters/min.) |
|
| Product pressure is obtained by: |
Pump
Gravity
Other |
| Product entrance pressure (psi or bar) |
minimum:
maximum: |
| Is there an existing pump? |
Yes
No |
If yes, what type of pump?
(e.g. centrifugal, gear pump, etc.) |
|
| Is there an existing bypass or bypass regulation installed in the piping system? |
Yes
No |
| AMBIENT CONDITIONS |
| Are ambient conditions (climate, humidity) to be described as normal? |
Yes
No |
| What will be the relative humidity? |
|
| What will be the minimum and maximum ambient temperature for the area of operation (F° or C°) |
minimum:
maximum: |
| Will the system be installed in a corrosive environment? |
Yes
No |
| Please indicate the required material construction: |
Standard
Special lacquering
Stainless steel
Other: |
| Please indicate the conveying direction seen from operator's view point. |
from right to left
from left to right |
| What is the maximum ceiling height where the system will be installed? (feet or meters) |
|
| POWER AND AIR SUPPLY |
| Is the air pressure of at least 5 bar/80 psi available? |
Yes
No |
| What line voltage is available? (e.g. 120V at 60 Hz) |
|
| Is the system to be istalled in a hazardous environment? |
Yes
No |
| If yes, please indicate the corresponding area classification: |
Class I
Class II
Division 1
Zone 0
Zone 2
Division 2
Zone 2 |
| QUANTITY MEASURING |
| Quantity measuring has to be obtained by means of: |
Electronic Scale
Mass Flowmeter |
| Does the scale or mass flowmeter need to be certified by authorities for custody transfer application? |
Yes
No |
| TECHNICAL |
| How many copies of the technical file do you need? |
|
| Please indicate the language for the operating instructions and the labels at the operator's panel: |
English
French
Spanish
Portugese |
| Please indicate all functions to be performed fully automatically. More related handling equipment for your packaging plant is available upon request. |
denesting of lid
conveying (infeed of empty drums to the filler)
positioning, centering
alignment of bunghole
opening of bunghole
filling
labeling
|
ink-jet printing
sealing
lid placing
lid pressing
closing/bunging
cap sealing
palletizing
|
| MTI Weigh Systems' Filling Systems can be equipped with comprehensive supplements and options. Please let us know about the supplements and options you want us to include in the quotation: |
|
|
SECTION B |
| (Required) Your Name: |
|
| (Required) Your Company: |
|
| (Required) Address: |
|
| (Required) City, State, Zip: |
|
| (Required) Telephone: |
|
| Fax: |
|
| (Required) E-mail: |
|
Information requested:
Catalog
Specifications
Pricing
Other: |
|
| Site Map |
